What’s the matter with particulate matter?

January 19, 2015

Particulate matter will always be present in diesel engines because it’s a by-product of combustion. So how can vehicle owners stop it becoming a problem? BG Products has developed a world’s-first solution to keep particulate matter from decreasing diesel engine performance or killing a DPF.

Diesel fuel is notorious for producing large amounts of particulate matter (soot). Regularly burning this in a diesel engine can take a toll, leaving unburnt hydrocarbons throughout the intake and emissions system.

The diesel particulate filter’s (DPF) primary job is to remove the soot from the exhaust gas, to reduce air pollution. We all know what happens when soot collects in the induction system (performance and fuel efficiency drop), but what happens when soot collects in the DPF?

The DPF is designed to capture and burn off collected soot; this is called regeneration. In regeneration mode, the fuel injection timing is adjusted; exhaust temperature increases and ideally, the unburnt hydrocarbons are, well, burnt.

To achieve the high temperatures necessary for the DPF to go into regeneration, the diesel vehicle must be driven at speeds exceeding 40 mph (64 km/h) for an extended period. This presents a problem for vehicles primarily driven in urban traffic—where the vehicle experiences excessive idling and may never travel consistently above 40 mph (64 km/h)—therefore never regenerating the DPF, which can be catastrophic to the component.

The solution

The common solution has been to remove and attempt to clean or replace parts altogether, which is costly, unsafe and inefficient as the problem will recur eventually. Many vehicles have even been recalled due to large amounts of soot trapped in the DPF, causing flames to emit from the exhaust pipe, turning emissions systems into blast furnaces!

David Tenpenny, BG Technical Service Advisor, says, “People in the diesel industry realise this is a real problem that’s not going away and if you want to solve it, you have to fix what’s causing it. If not, you’re just applying a sticking plaster.” Which, Tenpenny adds, has been the case for every other “solution” so far.

The BG Technology Department saw this problem as an opportunity, and after two years of research and development, became the first to market with a viable solution. The BG Diesel Intake and Emissions System Service uses ground-breaking technology to restore the DPF, while simultaneously performing an effective intake system cleaning.

With the touch of a button and the turn of a knob, the BG VIA,™ product code 9300, is the first piece of equipment to have the ability to command and control regeneration, which is key to cleaning the emissions system.

Installed through the BG VIA™ system, the BG Diesel Intake and Emissions System Cleaner, PN 258, effectively disperses hydrocarbons from the intake all the way through to the emissions system to be burned off and sent out the exhaust pipe.

According to David, careful temperature monitoring, adjusting RPM and patience are the key to a successful service.

“It’s also essential to follow this intense clean-up service with a BG Performance Oil Change with BG EPR®, BG DOC and BG 244.” advises David. “Prevent DPF clogging by performing this oil change service at each oil change interval!” Preventive maintenance with BG will greatly minimise the production of particulate matter, which will prolong the life of the engine and DPF system.

To request a call from one of the BG Team, Experts in the field of removing deposits, increasing MPG and extending engine life, just ask us to give you a call back or call us on 01284 777934.


Last updated: January 27, 2015 @ 10:04 AM


BG DPF Service2